Omega RD-MV100 Series User Manual page 249

3.
4.
5.
6.
7.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Explanation
Date/Day of the week
This is the date for monthly reports or the day of the week for weekly reports. The report
is created at the specified time on the specified date or day of the week.
Time
This is the time at which daily, weekly, and monthly reports are created. Hourly reports
are created every hour on the hour.
Time (hour)
Set the time to create daily, weekly, and monthly reports with the time on the
hour (00 to 23).
Pressing the [Input] soft key displays a window used to enter the time. Enter the
time and press the DISP/ENTER key. For the procedures related to entering
numerical values, see "Entering Numbers" on page 3-21.
This setting is void for hourly reports.
Report CH
This is the report data number to which the measurement/computation channel
is assigned. Select from R01 to R12. The reports are output in order according
to this number.
On/Off
[On] : Assign channels to "Report CH."
[Off] : Do not assign report channels to "Report CH."
Channel
Set the measurement or computation channel to assign to the report channel.
All measurement and computation channels can be specified. However, the
reports are not created for channels that are set to [Skip] or those that have the
computation turned [Off].
Sum scale (sum unit)
Select [Off], [/s], [/min], [/h], or [/day]. See section 11.11.
11.13 Setting the Report Function
11
11-27