Omega RD-MV100 Series User Manual page 79

3.5 Configuring the Functions
3-18
Soft key Settings in the Basic Setting Mode
Title
#3 Memory (8.11)
#4 Memory & trend (8.10)
#5 Aux
#6 Key lock (10.2)
#7 Key login (10.4)
#8 Save/Load, Initialize
#8 - #1 Save settings
#8 - #2 Load settings
#8 - #3 Delete
#8 - #4 Format
#8 - #5 Initialize
#9 Option
#9 - #1 Remote (10.7)
#9 - #2 Report (11.13)
#9 - #3 Timer (TLOG) (11.9)
#10 Communications
#10 - #1
#10 - #2
#10 - #3
#10 - #4
#10 - #5
#10 - #6
End End (3.6)
* See RD-MV100 Communication Interface User's Manual.
Item
Save method to the external storage medium
Type of data to be acquired
Event data
• Sampling interval
• Mode (Free/Trigger/Rotate)
• Number of blocks (number of memory divisions)
• Data length (file size)
• Pre-trigger position
• Type of trigger to use
Measurement channels to acquire data/display
the trend
Computation channels to acquire data/display the
trend
Switch between tag display and channel display
(7.2)
Minimum remaining amount of internal memory at
which to generate the alarm (10.6)
Set the displayed language (10.8)
Use/Not use partial expansion display (7.12)
Use/Not use batch function (for models with /BT1)
(10.11)
Use/Not use key lock
Password
Keys to lock, enable/disable the key lock
Use/Not use key login
Auto logout On/Off
Use/Not use user ID
User name
User ID
Password
Allow/Prohibit basic setting mode
Save setup data to the external storage medium (9.1)
Load setup data from the external storage
medium (9.1)
Delete files on the external storage medium (9.5)
Format the external storage medium (9.5)
Initialize the setup data in the internal memory
and clear measured/computed data (9.8)
Action assignment on remote terminals
Report types
Date/Time of creation
Report channel assignments
Sum unit
Timer mode (absolute time/relative time)
Interval
Reference time for the absolute timer
Turn ON/OFF reset at each interval
Turn ON/OFF data saving to the storage medium
*
Ethernet (IP_Address)
*
Ethernet (DNS)
*
FTP transfer file
*
FTP connection
*
Control (login, timeout)
*
Serial/Memory out
Terminate operations in the basic setting mode