Omega RD-MV100 Series User Manual page 81

3.6 Common Key Operations
Key Operations in the Setting Mode
Procedure
3-20
Selecting the parameter
1. Use the arrow keys to move the cursor (blue) to the appropriate parameter. The
available selections are displayed at the bottom of the screen above the soft
keys.
2. Select the parameter with the soft key. The box containing the parameter that
was changed turns yellow. The cursor moves the next parameter.
To cancel the settings, press the ESC key. A window appears for you to confirm
the cancellation. Select [Yes] and press the DISP/ENTER key.
Confirming the settings
1. Pressing the DISP/ENTER key confirms the new settings. The parameter boxes
return to a white color. The cursor moves to the first parameter on the page.
Returning to the menu screen of the basic setting mode
1. Press the ESC key to return to the menu screen of the basic setting mode.
Exiting the basic setting mode
Carry out the following steps when the basic setting menu is displayed.
1. Press the [END] soft key. A confirmation window with a message [Do you want
to store and make the new settings take effect?] appears.
2. Selecting [Yes] with the arrow key and pressing the DISP/ENTER key saves the
new settings and returns to the operation mode.
If you do not wish to save the new settings, select [No] with the arrow key and
press the DISP/ENTER key to return to the operation mode.
Selecting [Cancel] with the arrow key and pressing the DISP/ENTER key
cancels the "operation to exit the basic setting mode" and returns to the basic
setting mode menu. In this case, the setting changes made up to that point are
held.
Entering the setting mode
1. Press the MENU key to enter the setting mode.
2. Press the soft key to enter individual setting screens.
Common key operations in the setting mode are described.
Cursor position
(bule)
Setting selections (selected using the soft keys)