Omega RD-MV100 Series User Manual page 62

Chapter 3 Names of Parts/Run Mode/Common Operations
3.1 Names of Parts and Functions
Front Panel
10
1.
2.
3.
4.
5.
6.
7.
START STOP MEDIA FUNC ESC MENU
4 5 8 9 6
LCD screen
Displays various operation screens such as the trend display and the setup screen
to configure the recorder.
DISP/ENTER key
Displays and confirms the settings for switching screens in the operation mode.
Arrow keys
Used to select the screen in the operation mode and to select the parameter.
START key
Used to start the data acquisition to the internal memory and display the waveform
on the trend display. Also starts computation and the report function when the
computation function (/M1) is equipped.
STOP key
Used to stop the data acquisition to the internal memory. It also stops the updating
of the waveform on the trend display. If the model has the optional computation
function (/M1), the report is stopped. For computation, you can select whether or not
to stop the operation when the STOP key is pressed.
ESC key
Used to cancel an operation. Also used to return to the operation mode from the
setting mode (This function is the same as the MENU key).
MENU key
Used to enter the setting mode. Also used to return to the operation mode from the
setting mode (This function is the same as the ESC key).
1
3
DISP/ 2
ENTER
7
3
3-1