Using The Computation Function - Omega RD-MV100 Series User Manual

11.3 Using the Computation Function

Start/Stop Computation
Procedure
11-8
Operations related to the computation function are as follows :
• Start/stop computation.
This operation can be carried out with the START/STOP key or the FUNC key. The
computation can also be started or stopped via remote control or communication
commands.
• Reset computation data.
This operation can be carried out with the FUNC key. The computation data can also
be reset via remote control or communication commands.
• Release the computation data dropout display.
This operation is carried out with the FUNC key. The computation data dropout
display can also be released via communication commands.
For the remote control function, see section 10.7. For the communication function, see
MV100 Communication Interface User's Manual.
Operation using the START/STOP key
• Starting the computation (also starts the data acquisition to the internal
memory)
1. Press the START key to start the computation. At this point, the data acquisition
to the internal memory is also started. When the computation is started, a
computation icon is displayed in the status display section. For details related to
the status display section, see section 4.2.
• Stopping the computation (also stops the data acquisition to the internal
memory)
1. Press the STOP key. A confirmation window is displayed. For models with the
batch function (/BT1 option), the batch information is also displayed.
2. Use the arrow keys to select [Mem + Math] and press DISP/ENTER to stop the
computation. At this point, the data acquisition to the internal memory is also
stopped. The computation icon in the status display section also disappears.
Operation using the FUNC key
1. Press the FUNC key to display the soft key menu.
When the computation is suspended the [Math START] soft key is displayed. If
the computation is in progress the [Math STOP] soft key is displayed.
• Starting the computation
2. Press the [Math START] key to start the computation. When the computation is
started, a computation icon is displayed in the status display section. For details
related to the status display section, see section 4.2.
• Stopping the computation
2. Press the [Math STOP] key to stop the computation. The computation icon in
the status display section also disappears.