Omega RD-MV100 Series User Manual page 141

7.5 Setting the Message String (Trend)
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
.
MENU
Characters
Move the cursor to the desired message number.
Pressing the [Input] soft key displays a window used to enter the message
string. Enter the message string (up to 16 alphanumeric characters) and press
the DISP/ENTER key. For the procedures related to entering character strings,
see "Entering Character" on page 3-22.
#4
.
1
7
7-7