Omega RD-MV100 Series User Manual page 255

12.1 A List of Messages
• Memory Access Errors during Setting and Basic Setting Modes and Output
Communication Command Execution
Code Message
360 Output interface must be chosen from Ethernet or RS by using 'XO' command.
361 The memory data is not saved for the communication output.
362 There are no data to send 'NEXT' or 'RESEND'.
363 All data have already been transferred.
• Maintenance and Test Communication Command Errors
Code Message
390 Command error.
391 Delimiter error.
392 Parameter error.
393 No permission.
394 No such connection.
395 Use 'quit' to close this connection.
396 Failed to disconnect.
397 No TCP control block.
• Other Communication Errors
Code Message
400 Input username.
401 Input password.
402 Select username from 'admin' or 'user'.
403 Login incorrect, try again!
404 No more login at the specified level is acceptable.
410 Login successful. (The special user level)
411 Login successful. (The general user level)
420 Connection has been lost.
421 The number of simultaneous connection has been exceeded.
422 Communication has timed-out.
12-6
An English error message is returned via the communication interface. It is not
displayed on the screen.
An English error message is returned via the communication interface. It is not
displayed on the screen.
An English error message is returned via the communication interface. It is not
displayed on the screen.
Note
For information regarding the communication function of this recorder, see the RD-MV100
Communication Interface User's Manual (M3643).