Setting The Displayed Language (Basic Setting Mode) - Omega RD-MV100 Series User Manual

10.8 Setting the Displayed Language (Basic Setting
Mode)
Procedure
Explanation
10-14
Select the language that is used on the screen.
• The language setting applies to all modes (operation mode, setting mode, and basic
setting mode).
• The initial setting is English.
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press .
MENU
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Aux - Language
Select the language.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Range of screen elements that are displayed in the specified language
English and Japanese are used on all the screens.
German and French are used on the following screens. For other screens, the displays
will be the same as those for English.
• Screen menu in the operation mode (displayed using the DISP/ENTER key or arrow
key)
• FUNC key menu in the operation mode (displayed when the FUNC key is pressed)
• Error Messages
• Operation guide screens (confirmation screen that appears when the STOP key is
pressed or the selection screen that appears when exiting the basic setting mode, for
example.).
.
#5
1
.