Omega RD-MV100 Series User Manual page 27

Digital Screen
The measured/computed data are displayed using numerical values in large size. See
section "4.3."
Display update rate
Measured and computed values are updated every second. However, when the scan
interval on the RD-MV106/RD-MV112 is 2 s, the display update rate is also 2 s.
Bar graph Screen
The measured/computed data are displayed using bar graphs. See section 4.3.
Bar graph display(Vertical)
Display update rate
Measured and computed values are updated every second. However, when the scan
interval on the RD-MV106/RD-MV112 is 2 s, the display update rate is also 2 s.
Displayed information
The following Information can be displayed.
Information
Display direction
Base position
Displayed color
Scale display
Channel/Tag
Measured/computed value
Unit
Alarm mark
Tag/Channel
Alarm mark
Upper limit of span
Alarm point mark
Bar graph
Lower limit of span
Unit
Measured/computed value
Description
The bar graphs can be displayed horizontally or vertically.
⇒ "Section 7.13"
When the bar graph is displayed horizontally, the starting point
of the bar (base position) can be set to the minimum edge of the
measurement scale or to the center position. ⇒ "Section 7.10"
The displayed color of the channels are common with the trend
display. ⇒ "Section 7.8"
The number of divisions of the scale can be set to a value in the
range 4 to 12 div. ⇒ "Section 7.10"
(common with the trend display)
1.3 Display Function
1-9
1