Omega RD-MV100 Series User Manual page 243

Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Explanation
• While the number of samples acquired is less than the specified number of samples,
the avarage of acquired data is computed.
• The computation error data are not included in the rolling average computation.
• When the measured data exceed the upper and lower limits indicated below, the
value is clipped at the upper or lower limit and the moving average is calculated. The
upper and lower limits vary depending on the decimal position of the span upper and
lower limits of the computation channel.
Decimal Position of the Span Upper/Lower Limit of the
Computation Channel
.
.
.
.
.
11.10 Using the Rolling Average
Upper/Lower Limit
±100000000
±10000000
±1000000
±100000
±10000
±1000
11-21
11