Initializing Setup Data - Omega RD-MV100 Series User Manual

9.8

Initializing Setup Data

Initializes the setup data in the internal memory. Also Clears display data, event data,
manual sampled data, TLOG data (option), report data (option), and logs from the
internal memory (this is the same function as clearing data in the setting mode explained
in section9.7). The recorder returns to the operation mode .
For the initial settings of the setup data, see Appendix 1.
Procedure
• These procedures are carried out in the basic setting mode.
Press
Press
Press the soft key
Press
Press
1.
2.
MENU .
FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
.
#8
soft key to display the [Save/Load, Initialize] menu screen.
#5
soft key to display the [Initialize] screen.
Select the type of initialization to set in the [Type] box.
To cancel the operation and return to the [Save/Load, Initialize] menu, press the
ESC key.
Clear 1 : Clears the settings in the basic setting mode, settings in the setting
mode and the internal memory.
Clear 2 : Clears the settings in the setting mode and the internal memory.
Clear 3 : Clears the internal memory.
Pressing the DISP/ENTER key displays a confirmation window. Pressing the
DISP/ENTER key initializes the settings and returns to the operation mode.
1
9
9-15