Omega RD-MV100 Series User Manual page 189

9.1 Saving/Loading Setup Data
Loading Setup Data (In the Basic Setting Mode)
Procedure
9-4
Loads the setup data (set in both the setting mode and the basic Setting mode) from a
setup file in the external storage medium and make the settings effective.
Returns to the operation mode when loading is completed.
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate position.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
Press the soft key
#8
Press
#2
Press
1. A list of setup files in the storage medium appears.
Select the file to be loaded (The extension of setup files is "PNL").
To cancel the operation and return to the [Save/Load, Initialize] menu, press the
ESC key.
2. Press the DISP/ENTER key to load the file.
After loading, the screen returns to the operation mode. The loaded setup data
take effect.
Note
If the loaded data does not take effect, refer to the error log. For the procedure related to
displaying the error log, see section 10.5.
.
soft key to display the [Save/Load, Initialize] menu screen.
soft key to display the [Load settings] screen.
File list