Omega RD-MV100 Series User Manual page 68

3.4 Run Mode
There are three run modes on the recorder : operation, setting, and basic setting. This
section describes the functions and relationships of the three modes.
Mode Types
Mode Type
Operation mode
Setting mode
Basic setting mode
(Setup mode)
Mode types
Power ON
Operation mode
Operation screens
MENU MENU or ESC
Setting mode
Pressing FUNC
for 3 seconds
Menu screen
MENU or
Soft key
ESC
Setting screens
Description
This mode is used for daily operation.
This mode is entered when the power
is turned ON.
This mode is used to configure the
recorder operation such as input
range and alarms.
This mode is entered by pressing the
MENU key in the operation mode.
Measured data cannot be displayed in
this mode.
Operations such as measurements,
alarm detection, and data acquisition
are continued.
This mode is used to configure the
basic environment of the recorder
such as the input format and the data
storage format.
This mode is entered by pressing the
FUNC key for three seconds at the
setting mode menu. This mode cannot
be entered while data acquisition or
computation is in progress.
Operations such as measurements,
alarm detection, and data acquisition
are stopped.
[END] soft key - DISP/ENTER
Basic setting mode
Menu screen
Soft key ESC
Setting screens
Possible Operations
Monitoring operation
Data acquisition
Setting the operation
Operation related to the file on
the external storage medium
Basic settings of the functions
Operation related to the file on
the external storage medium
3
3-7