Omega RD-MV100 Series User Manual page 157

7.13 Setting the Display Direction, Background
Color, Waveform Line Width, Trip Line Width,
Grid, and Scroll Time
• The display direction of the trend and bar graph can be set to horizontal or vertical.
• The background color used in the trend, digital, bar graph, and summary displays can
be set to white or black (common to all screens).
• The line width of the trend can be selected as 1, 2, or 3 dots.
• The line width of the trip line can be selected as 1, 2, or 3 dots.
• The grid lines can be displayed on the trend's waveform display area by dividing the
display span into 4 to 12 sections.
• The interval at which the displayed group is automatically switched on the trend,
digital, and bar graph displays can be specified. The displayed group rotates from
group 1 to group 4.
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
Press the soft key
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
Set the display direction of the trend
1.
Set the display direction of the bar graph
2.
MENU .
Next 1/3
.
#5
.
1
2
3
4
5
6
7
Direction - Trend
Select horizontal or vertical.
Direction - Bar graph
Select horizontal or vertical.
#4
.
7-23
7