Omega RD-MV100 Series User Manual page 172

8.6 Acquiring Event Data
This operation is performed when the type of data acquired is set to [Event] or [E + D].
For setting the data acquisition method, see sections 8.10 and 8.11.
Procedure
During [Free] Mode
Start data acquisition
To begin data acquisition, press the START key. The icon in the status display section
will change accordingly.
Stop data acquisition
1.
2.
Note
•
•
•
•
•
•
Icon
Press the STOP key. A confirmation window opens.
On models with the computation option, the confirmation window displays the
following choices : [Mem + Math] (terminate acquisition and all computations),
[Memory] (terminate acquisition), and [Cancel].
Select [Yes] ([Mem + Math] or [Memory] for models with the computation
function) using the arrow keys and press the DISP/ENTER key to stop the data
acquisition. The icon in the status display section changes to a stop icon.
One file is created for one set of start and stop operations. The maximum number of files that
can be stored in the internal memory is 16.
When the memory area becomes full or the number of files exceeds 16, existing data will be
overwritten starting with the oldest data.
When a power disruption occurs the file is closed. When the power resumes, data are written
to a new file.
Data acquisition can also be started or stopped via remote control or communication
commands.
The START/STOP operation also starts/stops the report function.
When the computation is stopped, it is started with the START key.
8
8-13