Setting The Key Login/Logout Functions (Basic Setting Mode) - Omega RD-MV100 Series User Manual

10.4 Setting the Key Login/Logout Functions (Basic
Setting Mode)
Procedure
10-6
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press .
MENU
Press for 3 seconds. The menu screen for the basic setting mode appears.
FUNC
Next 1/3
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Use/Not
Select [Use] or [Not]. If [Use] is selected, items 2, 3, 4, 5, 6, 8, and 9 are
displayed.
[Use] : Use key login.
[Not] : Do not use key login.
2. Auto logout
Select [On] or [Off].
[On] : Use the auto logout.
[Off] : Do not use the auto logout.
3. User ID Use/Not
[Use] : Use the user ID.
[Not] : Do not use the user ID.
If [Use] is selected, item 7 (User ID) appears.
Note
For models with the batch function, The key login function of all users (1 to 7, item 4) turns
[Off](item 5), when [User ID] is changed to [Use] from [Not].
4. Number
This is the user registration number (1 to 7). Select the user number to be set.
5. On/Off
Set whether or not to enable the key login function for the selected user. Even if
the user name and other parameters below are specified, the login function
cannot be used if it is turned Off here.
[On] : Enable the key login function for the selected user.
[Off] : Disable the key login function for the selected user.
.
#7
1
2
3
4
5
6
7
8
9
.