Omega RD-MV100 Series User Manual page 293

• Measurement/computation errors are discarded when MAX and MIN are determined.
• Measurement/computation errors, over range, and computation overflow are discarded when
determining AVE and SUM.
• The report output values of AVE, MAX, MIN and SUM vary depending on the data condition
of the measurement and computation channels as shown in the table below.
Item Data Condition of Measurement Channels
AVE When all data are measurement errors or over range (Blank)
(Average value)
MAX, MIN • When all data are measurement errors
(Maximum value, • + over range
minimum value) • – over range
SUM • When all data are measurement errors or over
(Sum value) range
• When the sum value exceeds 3.4E + 38
• When the sum value is below –3.4E + 38
Item Data Condition of Computation Channels
AVE When all data are computation errors or over range
(Average value)
MAX, MIN • When all data are computation errors
(Maximum value, • When the maximum value exceeds 99999999
minimum value) • When the minimum value is below –9999999
The decimal position that was specified when the span for the equation was specified is
reflected in the maximum and minimum values. For example, if the span setting of the
equation is "200.0," then "99999999" is output when the value exceeds "99999999.9" and
"–99999999" is output when the value is below "–999999.9."
SUM • When all data are computation errors or
(Sum value) computation overflow
• When the sum value exceeds 3.4E + 38
• When the sum value is below –3.4E + 38
Appendix 2 Data Formats of ASCII Files
Report Output Value
(Blank)
99999
–99999
(Blank)
9.999999E + 99
–9.999999E + 99
Report Output Value
(Blank)
(Blank)
999999999
–99999999
(Blank)
9.999999E + 99
–9.999999E + 99
App
App-11