Omega RD-MV100 Series User Manual page 155

4. Boundary
This is a value within the display span. By moving the value within the display
span to another position (see step 3), the area on either side of the boundary is
expanded or compressed.
Pressing the [Input] soft key displays a window used to enter a numerical value.
Enter the boundary and press the DISP/ENTER key. For the procedures related
to entering numerical values, see "Entering Numbers" on page 3-21.
The range for the boundary :
The minimum value of the span +1 to the maximum value of the span –1
(when the range is not set to scaling)
The minimum value of the scale +1 to the maximum value of the scale –1
(when the range is set to scale).
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
Note
• The partial expansion display is turned OFF for all channels if the partial expansion display
setting (use/not use) in the basic setting mode is changed and stored.
• When the range setting of the channel is set to [Skip] or when the span width is less than or
equal to 1, the partial expanded display cannot be specified. (The box is grayed in this case.)
7.11 Using Partial Expanded Display (Trend)
7
7-21