Omega RD-MV100 Series User Manual page 156

7.12 Setting Whether or Not to Use the Partial
Expansion Display (Basic Setting Mode)
Procedure
7-22
Set whether or not to use the partial expansion display.
• The initial value is [Not].
• The display specifications of the partial expansion display are set in the setting mode.
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Next 1/3
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Partial
Select [Use] or [Not].
Use : Partial expansion display can be set in the setting mode.
Not : Partial expansion display cannot be set.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
.
#5
1
.