Omega RD-MV100 Series User Manual page 175

8.7 Saving the Data in the Internal Memory to the External Storage Medium
Explanation
When Using Auto Save
Procedure
8-16
Name of the directory to which to save the data
For the setting procedure of the directory to which to save the data, see section 8.9.
• Each time the storage medium is inserted into the drive and the data are saved, the
sequence number of the directory name increments by one.
Example When the specified directory name is "DATA0," the first set of data are
saved to "DATA0.000" and the second set of data are saved to
"DATA0.001."
• When the directory name is changed, the sequence number is reset to zero.
• When the data are divided and saved over multiple external storage media due to lack
of space on the storage medium, the same directory name is used.
• If the specified directory already exists in the external storage medium, an error
message is displayed and the operation terminates (data are not saved).
Data are automatically stored by leaving the external storage medium inserted in the
drive. For the data storage operation, see section 8.4.
1. Insert the external medium into the drive and then press the MEDIA key to
detect it.
Note
• For the memory usage display of the internal memory, see section 4.2.
• To check the free space on the storage medium, see section 9.5.
• For the name of the directory in which the data are saved, see section 8.9.
When the external storage medium does not have enough space
Replace the storage medium that is inserted in the drive.
1. The message [Not enough free space on media] appears.
Change the external storage medium. The unsaved data are saved to the
external storage medium at the time for the next "auto save" execution.
Note
Be aware that data in the internal memory will be overwritten if there is not enough free space
on the external storage medium or if the storage medium is not inserted in the drive in the
following cases:
• When the number of display data files exceeds 16. A file is created for each auto save
interval (see section 8.8).
• When the event data are acquired to the internal memory in the free run mode and the
number of files exceeds 16. A file is created at specified acquisition periods (data length,
see section 8.11).