Omega RD-MV100 Series User Manual page 256

Status Messages
Code Message
500 Execution is complete.
501 Please wait a moment...
503 Data are being saved to media...
504 File is being loaded from media...
505 Formatting...
506 Memory save to media was interrupted.
507 Exchange media to continue the saving operation.
510 Range cannot be changed during sampling or calculating.
511 MATH expression cannot be changed during sampling or calculating.
512 Because memory save is 'manual' mode, FTP is not available.
520 Connecting to the line...
521 The data file is being transferred.
551 FTP test is being executed...
Cautions
Code Message
600 Measured data and Settings have been initialized.
601 Measured data have been initialized.
610 This username is already registered.
611 There is no user who can enter to the SETUP mode.
System Errors
Servicing is required when a system error occurs. Contact your nearest Omega dealer
for repairs.
Code Message
901 ROM failure.
902 RAM failure.
910 A/D memory failure for all input channels.
911 Channel 1 A/D memory failure.
912 Channel 2 A/D memory failure.
913 Channel 3 A/D memory failure.
914 Channel 4 A/D memory failure.
921 Channel 1 A/D calibration value error.
922 Channel 2 A/D calibration value error.
923 Channel 3 A/D calibration value error.
924 Channel 4 A/D calibration value error.
930 Memory acquisition failure.
940 The Ethernet module is down.
12.1 A List of Messages
Ref. Section
–
–
See section 10.6.
See section 10.6.
12
12-7