Omega RD-MV100 Series User Manual page 80

3.6 Common Key Operations
This section describes common key operations that are used often.
START
Key Operations in the Basic Setting Mode
Procedure
Entering the basic setting mode
1.
2.
3.
Note
•
•
Common key operations in the basic setting mode are described.
Soft keys
MEDIA
STOP FUNC
Press the MENU key to enter the setting mode.
Hold the FUNC key down for three seconds to enter the basic setting mode.
Press the soft key to enter individual setting screens.
Basic setting mode cannot be entered while data acquisition or computation is in progress.
Stop data acquisition and computation first before entering the basic setting mode.
Changing and storing the data acquiring method in the basic setting mode ([#3 Memory] and
[#4 Memory and trend]) clears the measured/computed data in the internal memory. Make
sure to save the data to the external storage medium before entering the basic setting mode.
Setting selections (selected using the soft keys)
Arrow keys
ENTER
ESC MENU
DISP/ENTER key
Cursor position
(bule)
3
DISP/
3-19