Omega RD-MV100 Series User Manual page 182

8.11 Setting the Method of the Display/Event Data
Acquisition (Basic Setting Mode)
Set the method of the display/event data acquisition.
Procedure
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
Press
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
Data save to the external storage medium
1.
Note
Data acquisition
• Acquiring only the display data
2.
Note
MENU .
FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Save
Set save method to the external storage medium.
Select [Auto] or [Manual].
Auto : auto save
Manual : manual save
If [Manual] (manual save) is selected in step 1, set whether to save all the data in the internal
memory or only the data that have not been saved when the storage medium is inserted into
the drive and the front cover is closed. See section 8.9.
Data
Select [Display].
If [Auto] (auto save) is selected in step 1 and [Display] is selected in step 2, set the auto save
interval for the display data. See section 8.8.
#3
.
1
2
3
4
5
6
7
8
8
8-23