Omega RD-MV100 Series User Manual page 88

4.2 Explanation of the Status Display Section
4-4
• When the trigger mode is set to [Trigger] or [Rotate]
• Bar graph
Displays the used space with respect to the specified memory length (data
length, see section 8.11).
When pretrigger is specified and the START key is pressed causing the RD-
MV100 to enter the trigger wait state, data of size equal to the pretrigger amount
are acquired to the internal memory. The bar is displayed in orange. After
acquiring data of size equal to the pretrigger, the length of the bar stays fixed.
However, the relevant data are updated until the trigger is activated. When the
trigger is activated, the bar turns green. Data are acquired to the internal
memory after the pretrigger data.
During the [Trigger] mode (see section 8.2), [Full] is displayed when data
acquisition to all blocks is complete. When [Full] is displayed, event data are no
longer acquired even if the trigger condition is met. In this case, save the data
in the internal memory to the external storage medium.
• Block display
When the event data storage area is divided into multiple blocks, the usage
condition of the blocks are displayed.
White block : No data
Green block : Block containing data that were acquired to the internal
memory after starting the current acquisition of event data.
Gray block : Block containing data that were acquired before the current
start operation.
7. The external storage medium condition
No display : No storage medium inserted.
D and E displayed in order : Accessing the storage medium.
E : Storage medium is idle (no access)
F : The used space of the storage medium is indicated by the green level indicator in
the icon. The colored section indicating the level turns red when the amount of
free space on the storage medium falls below 10%.
8. Computation icon (option)
Computation icon not displayed : No computation option or computation is suspended
White computation icon :
Yellow computation icon :
Note
Computation data dropout occurs when the computation is not completed within the scan
interval. The computation icon returns to the green icon by pressing FUNC → [MathACK] soft
key(see section 11.3). If a computation dropout occurs, make the scan interval longer (see
section 5.9) or reduce the number of computation channels that are turned On (see section
11.4).
9. Key lock icon
Key icon : Key lock ON
No display : Key lock OFF
10. Alarm icon
Displayed when any one of the alarms is occurring. For details, see chapter 6.
Computation in progress
Computation data dropout occurred