Omega RD-MV100 Series User Manual page 185

8.12 Storing Measured/Computed Data at Arbitrary
Times (Manual Sampling)
Procedure
8-26
The instantaneous values of all measurement and computation channels (excluding the
measurement channels that are set to [Skip] and the computation channels that are
turned Off) can be stored to the internal memory with a key operation.
Computation channels are options.
See section 8.3.
This operation is carried out in the operation mode.
1. Press the FUNC key to display the soft key menu.
2. Press the [Manual sample] soft key. The instantaneous values of all channels
(excluding the measurement channels that are set to [Skip] and the computation
channels that are turned Off) are stored to the internal memory.
Note
The manual sampling can also be carried out via remote control or communication commands.