Omega RD-MV100 Series User Manual page 72

Configuration Details
The configuration details of the setting mode and the basic setting mode are shown
below. Enclosed in parentheses are reference sections.
Settings related to the input
Item
Scan interval
Input specifications
(5.1 to 5.7)
Burnout (5.9)
Reference junction
compensation
Noise elimination
Settings related to the alarm
Item
Alarm
Alarm output relay
operation (option)
(6.4)
Setting Mode
• Input type
• Measurement range
• Upper and lower limit of span
• Reference channel for differential
computation
• Upper and lower limits of scale
• Unit
• Filter time constant/Off (RD-MV102/•
RD-MV104) (5.8)
• Number of samples for the moving
average/Off (RD-MV106/RD-MV112) (5.8)
Setting Mode
• Alarm type (6.2)
• Alarm value (6.2)
• Output relay On/Off (6.2)
• Output relay number (6.2)
• Alarm delay time (6.3)
3.5 Configuring the Functions
Basic Setting Mode
• Scan interval
• Burn out Off/Up/Down
• Switch between [Internal] and
[External]
• Compensation voltage when set to
[External]
Integration time of the A/D
converter (5.9)
Basic Setting Mode
• Display hold/non-hold (6.4)
• The time interval for the rate-of-
change alarm (for measurement
channels only) (6.4)
• Hysteresis (for measurement
channels only) (6.4)
• Reflash alarm
• AND operation
• Relay energize/de-energize
• Relay hold/non-hold
3-11
3