Omega RD-MV100 Series User Manual page 86

4.2 Explanation of the Status Display Section
4-2
The following information is displayed in the status display section during the operation
mode and the setting mode. (The information is not displayed in the basic setting mode.
[Setup Mode] is displayed instead).
5-1
5
1
2
3
6
6-1 ([Free] ode)
6-2 ([Trigger] or [Rotate] mode)
4
A
B
C
1. User name
The user name is displayed when a user is logged in using the key login function.
2. Group name or screen name
The name of the group or screen that is displayed in the data display section. [ALL]
is displayed only during all channel display (see section 4.3).
3. Current date and time
The current date and time are displayed.
4. ON/OFF state of the measured/computed data acquisition.
A and B are displayed alternately :
C : Data acquisition is suspended.
Note
For event data that starts acquiring data upon receiving a trigger, the indicator indicates that
the data acquisition is in progress even when it is in the trigger wait state. The trigger wait
state can be identified using the bar graph described in item 6.
8 9 10
7
D
E
F
Data acquisition in progress or waiting for the
event data trigger.