Omega RD-MV100 Series User Manual page 251

12.1 A List of Messages
Code Message
90 No permission to enter to the SETUP mode.
91 Password is incorrect.
92 Press [ESC] key to change to the operation mode.
100 IP address doesn't belong to class A, B, or C.
101 The result of the masked IP address is all 0s or 1s.
102 SUBNET mask is incorrect.
103 The net part of default gateway is not equal to that of IP address.
104 FTP client failed because the memory mode is 'manual'.
• Execution Errors
Code Message
150 This action is not possible because sampling is in progress.
151 This action is not possible during sampling or calculating.
152 This action is not possible because saving is in progress.
153 This action is not possible because formatting is in progress.
155 The message is not written while sampling is stopped.
160 Cannot load the specified data. Change the memory setting.
Operation Errors
• Errors Related to External Storage Medium
Code Message
200 Operation aborted because an error was found in media.
201 Not enough free space on media.
202 Media is read-only.
210 Media has not been inserted.
211 Media is damaged or not formatted.
212 Format error.
213 The file is read-only.
214 There is no file or directory.
215 Exceeded the allowable number of files.
216 The file or directory name is incorrect.
217 Unknown file type.
218 Directory exists. Delete the directory or change directory name.
219 Invalid file or directory operation.
220 The file is already in use. Try again later.
230 There is no setting file.
231 Abnormal setting exists in file.
• Errors Related to Historical Trend
Code Message
232 There is no available data.
233 The specified historical data do not exist.
234 The specified channel is not assigned to the display group.
12-2
Explanation/Countermeasures/Ref. Section
See sections 10.3 and 10.4.
See sections 10.1 and 10.3.
Press the ESC key.
See Communication Interface User's Manual.
See Communication Interface User's Manual.
See Communication Interface User's Manual.
See Communication Interface User's Manual.
See Communication Interface User's Manual.
Explanation/Countermeasures/Ref. Section
See sections 8.5 and 8.6.
See sections 8.5, 8.6, and 11.3.
Wait till the saving ends.
Wait till the formatting ends.
See sections 8.5 and 8.6.
See sections 4.5, 9.3, and 9.4.
Explanation/Countermeasures/Ref. Section
See Communication Interface User's Manual.
Use another storage medium.
Release the write protection.
Insert a storage medium into the drive.
Use another storage medium or carry out formatting.
Try formatting again or use another storage medium.
Access to other files or make the file write-enable.
See Communication Interface User's Manual.
Delete files or change storage medium.
See sections 8.9 and 9.1.
Access to other files.
See section 8.9.
Cannot handle files and directories in the 2nd and
deeper layers.
Wait till file is free.
Access to other files.
Access to other files.
Explanation/Countermeasures/Ref. Section
This message may appear when recalling historical
trend. Access to other files.
This message may appear when recalling historical
trend. See section 4.5.
This message may appear when switching to trend
or bar graph from overview.
See sections 4.4 and 7.6.