Omega RD-MV100 Series User Manual page 187

9.1 Saving/Loading Setup Data
Loading Setup Data (In the Setting Mode)
Procedure
9-2
Loads the setup data set in the setting mode only, from a setup file in the external
storage medium and make the settings effective. Setting items that are inconsistent with
the content of the basic setting mode of the recorder will not be acquired.
Returns to the operation mode when loading is completed.
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate position.
Press MENU .
Next 1/3
Press the soft key
#7
Press
#2
Press
1. A list of setup files in the storage medium appears.
Select the file to be loaded (The extension of setup files is "PNL").
To cancel the operation and return to the [Save/Load, Clear data] menu, press
the ESC key.
2. Press the DISP/ENTER key to load the file.
After loading, the screen returns to the operation mode. The loaded setup data
are made effective.
Note
If the loaded data does not take effect, refer to the error log. For the procedure related to
displaying the error log, see section 10.5.
.
soft key to display the [Save/Load, Clear data] menu screen.
soft key to display the [Load settings] screen.
File list