Omega RD-MV100 Series User Manual page 14

How to Use this Manual
Conventions Used in this Manual
viii
Unit
K ....... Denotes "1024." Example : 768 KB (File capacity)
k ........ Denotes "1000."
M ....... Denotes "1024K." Example : 1.2 MB (Storage capacity of floppy disks)
B ....... "Bytes." Example : 1.2 MB (Storage capacity of floppy disks)
Symbols
The following symbols are used in this manual.
Affixed to the instrument. Indicates danger to personnel or
instrument and the operator must refer to the User's Manual.
The symbol is used in the User's Manual to indicate the
reference.
Describes precautions that should be observed to prevent injury
WARNING
or death to the user.
Describes precautions that should be observed to prevent minor
CAUTION
or moderate injury, or damage to the instrument.
Note
Provides important information for the proper operation of the
instrument.
Notation regarding procedures
On pages that describe the operating procedures in Chapter 3 through 11, the following
symbols are used to distinguish the procedures from their explanations.
[ ] ............. Represents contents that are displayed on the screen. Example : [Volt]
⇒ " " ........ Indicates a reference item. Example : ⇒ "1.3 Display Function"
#1 #12
to
Follow the steps indicated with numbers. The procedures are
Procedure
given with the premise that the user is carrying out the steps for the
first time
This section describes the setting parameters and the liitations
Explanation
regarding the procedures. It does not give a detailed explanation of
the function. For detail on the function, see chapter 1.
...... Denotes the soft key that is used to make a
selection on the setting and basic setting menus.