Omega RD-MV100 Series User Manual page 159

7.14 Setting the Brightness of the Screen and the
Backlight Saver Function
• There are eight screen brightness settings which can be selected (1 to 8).
• The lifetime of the LCD backlight can be extended by automatically dimming the light
when there has been no key operation for a certain amount of time. The screen will
return to the original brightness with a key operation or an alarm occurrence. The
initial setting is [Off].
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
Press the soft key
Press the soft key
To display the setting screen press the soft key
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
Setting the brightness of the screen
1.
Setting the backlight saver
2.
3.
4.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
MENU .
Next 1/3
.
#5
.
1
2
3
4
Brightness
Select from 1 to 8. A higher number corresponds to a brighter screen setting.
On/Off
When [On] is selected, [Saver time] and [Restore] boxes are displayed.
Saver time
Select the time from 1 min, 2 min, 5 min, 10 min, 30 min, and 1 hour.
If the specified time elapses without any key operation, the LCD backlight is
automatically dimmed.
Restore
Select [Key] or [Key + Alm] (Key + Alarm).
Key : The screen will return to the original brightness with a key operation.
Key + Alarm : The screen will return to the original brightness with a key
operation or an alarm occurrence.
#4
.
7-25
7