Figure 2-5 Interface After Successfully Logging In - Huawei OceanStor S2600 Manual

2 Troubleshooting Preparation
4.
5.

Figure 2-5 Interface after successfully logging in

6.
----End
2-8
NOTE
"028XXXXXXXX (area code+phone number)" refers to the telephone number by which the
l
maintenance terminal is connected to the remote modem. This phone number must allow direct
dialup.
During dialup, the OH indicator of the near-end modem is always on.
l
If the interface prompts errors, such as "NO CARRIER", "BUSY", "NO ANSWER", and
l
"ERROR" after the command atdt is executed, check the configurations of the remote modem
and make more dialup attempts.
When the near-end modem and the remote modem are successfully connected, connect the
remote modem to the storage devices with a serial port cable. Then press any key to go into
CLI interface.
According to the prompts on the CLI interface, enter the user name and password, as shown
in Figure 2-5.
NOTE
For security, when you enter a password, there is no local echo.
When successfully logging in, go to the CLI mode. Now you can manage and maintain the
storage devices.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S2600 Storage System
Troubleshooting
Issue 03 (2010-01-28)