Preparations And App Login - Huawei FusionModule800 Installation Manual

FusionModule800 Smart Small Data Center
Installation Guide (Six Fans)
Step 4 Set Internet Explorer parameters.
1.
2.
Step 5 Log in to the ECC800 WebUI.
1.
2.
----End

6.3.2 Preparations and APP Login

Prerequisites
FusionModule running environment requirements:


Issue 10 (2019-12-20)
When you use Internet Explorer 8.0 for access, set Internet Explorer to ensure the normal
display of and operations on the WebUI. Choose Tools > Compatibility View.
Add the ECC800 IP address to the list of trusted sites and enable automatic file
downloading. Then set the security level of the trusted site to the lowest.
Enter https://monitoring IP address (such as https://192.168.1.10) in the address box of
the browser, and then press Enter to enter the WebUI login page.
Figure 6-2 WebUI login page
On the login page, enter the preset user name admin and preset password Changeme,
set the language, and click Log In.

After the first login, change the password in time to ensure account security and prevent
unauthorized network attacks, such as data tampering. Huawei will not be liable for any security
issues caused by your failure to change the preset password in time or password loss after changing.
 An account is logged out due to timeout if no operation is performed within 10 minutes after system
login.
 If the password is incorrect, the Verify Code dialog box is displayed.
The mobile device must run Android 4.0 or later and no root operation is performed (the
operating system is not flashed).
The mobile device must have sufficient space for installing the new APP. The size of the
APP installation package is 7.9 MB, and the size of files after APP installation is about
9.28 MB.
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
237