Preparations And App Login - Huawei FusionModule800 Installation Manual

FusionModule800 Smart Small Data Center
Installation Guide
2.
----End

6.3.2 Preparations and App Login

Prerequisites
App operating environment requirements:





Procedure
Step 1 Download the app installation package using any of the following three methods:

Issue 02 (2016-11-15)
Figure 6-2 WebUI login page
On the login page, enter the preset user name admin and preset password Changeme,
set the language, enter the verification code, and click Log In.
 After the first login, change the preset password.
 An account is logged out due to timeout if no operation is performed within 10 minutes after system
login.
The mobile device must run Android 4.0 or later and is not root operating system (the
operating system is not flashed).
The mobile device must have sufficient space for installing the new app. The size of the
app installation package is 5.59 MB, and the size of files after app installation is about
8.01 MB.
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800 as well as the user name and password
used for WebUI login.
A PC with an IP address in the same network segment as that of the ECC800 is prepared,
and the PC has connected to port WAN_1 on the ECC800.
Log in to the HUAWEI App Market app or Google play app, search for FusionModule,
and tap Download.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Power-On Commissioning
193