Adjusting The Squareness Of The Developer, Fixer, And Wash Racks - Kodak X-Omat 270 RA Service Manual

Adjusting the Squareness of the Developer, Fixer, and Wash Racks

[1] Place the entrance side of the RACK on a
smooth, flat surface.
[2] Check that the SIDE PLATES are flat on the
flat surface.
[3] If necessary, apply pressure to the SIDE
PLATES. See the figures.
The GUIDE SHOES of the
DEVELOPER RACK are not
adjustable.
[4] Check that the longer edges of the GUIDE
SHOES are pointed in the direction of film
travel.
2-4
NOTE
SIDE PLATE (2)
Developer or Fixer Rack
Wash Rack
H104_0097ACA
H104_0097AA
H104_0139AA
2B6845