Removing The Drive Shaft And The Worm Gears - Kodak X-Omat 270 RA Service Manual

Removing the Drive Shaft and the Worm Gears

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Lift the TOP COVER.
[3] Remove:
• DRIVE SIDE PANEL
• EXIT PANEL
• WET SECTION COVER
• 2 EVAPORATION COVERS
• CROSSOVERS
• RACKS
• DRIVE CHAIN COVER
[4] Loosen the 4 DRIVE MOTOR BOLTS from
the MOTOR BRACKET.
[5] Lift the DRIVE MOTOR and remove the
DRIVE CHAIN.
3-2
DRIVE
CHAIN
COVER
MOTOR
BRACKET
DRIVE CHAIN
SCREW (3)
WASHER (3)
LOCK WASHER (3)
Removing the Drive Motor Bolts
DRIVE
MOTOR
SPROCKET
DRIVE MOTOR
BOLT (4)
H104_0147CCB
H104_0147CA
2B6845