Kodak X-Omat 270 RA Service Manual page 20

[1] Remove the WASH RACK from the
PROCESSOR.
[2] For each existing original D ROLLER
ASSEMBLY, remove:
• 2 OUTER E-RINGS and keep
• 2 SPRINGS and keep
• 2 white BEARINGS and keep
• 2 INNER E-RINGS and discard
• existing ROLLER ASSEMBLY 911660 from
the SHAFT and discard
2-6
SHAFT
Installing New Style D Roller Assemblies in the Wash Rack
[3] For each new D ROLLER ASSEMBLY, install:
• new style D ROLLER ASSEMBLY 246979
on the existing SHAFT
• 2 white BEARINGS
• 2 SPRINGS
• 2 OUTER E-RINGS
Do not install the INNER E-RINGS on
the new style D ROLLER
ASSEMBLIES.
ROLLER
ASSEMBLY
246979
D
IMPORTANT
white
BEARING (2)
OUTER
E-RING (2)
SPRING (2)
H104_0457HCA
H104_0457HA
A
B
D
C
D
C
D
2B6845