Removing The Dryer Thermistor Rt3 - Kodak X-Omat 270 RA Service Manual

Removing the Dryer Thermistor RT3

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Lift the TOP COVER.
[3] Remove:
• WET SECTION COVER
• TOP EXIT RACK
• DRYER RACK
[4] Remove the SCREW, the LOCK WASHER,
the WASHER, and the Old Style
THERMISTOR BRACKET or the New Style
THERMISTOR/THERMOSTAT BRACKET.
Old Style
THERMISTOR
BRACKET
SCREW
(2)
CONNECTOR
P/J 28
Old Style Dryer Thermistor
4-4
SCREW
LOCKWASHER
WASHER
DRYER
THERMISTOR
H104_0448CCA
H104_0448CA
[5] Remove the 2 SCREWS from the Old Style
DRYER THERMISTOR.
[6] Disconnect the CONNECTOR P/J 28.
[7] Remove the DRYER THERMISTOR from the
PROCESSOR.
[8] Reverse the above procedure to install a new
DRYER THERMISTOR and to assemble the
PROCESSOR.
SCREW
LOCK WASHER
WASHER
New Style Dryer Thermistor
THERMISTOR/
THERMOSTAT
BRACKET
DRYER
THERMISTOR
CONNECTOR
P/J 28
H104_0447CCA
H104_0447CA
2B6845