SERVICE MANUAL
RESILIENT DRIVE ROLLER in the DEVELOPER and FIXER RACKS
SCREW
WASHER
SPACER
BEARING
LOCK
WASHER
SPRING
non-drive
SIDE PLATE
[1] Remove the 2 SPRINGS from the top of the RACK.
[2] Remove from the ends of RESILIENT DRIVE ROLLER outside of the SIDE PLATES:
• SCREWS
• WASHERS
• LOCK WASHERS
• GEAR
• SPACERS
• BEARINGS
[3] Rotate the flat part of the SHAFT to the up position.
[4] Move the DRIVE ROLLER toward the non-drive side and remove the KEY from the DRIVE GEAR.
[5] Move the SHAFT of the DRIVE ROLLER towards the drive side.
[6] Remove:
• THRUST WASHER
• SPROCKET
• SPACER
12
SPACER
SHAFT
RESILIENT
DRIVE
ROLLER
SPROCKET
SPACER
BEARING
drive
SIDE PLATE
SPRING
KEY
THRUST
WASHER
DRIVE
GEAR
KEY
SCREW
WASHER
LOCK
WASHER
SPACER
H172_0631DCA
H172_0631DA
12JAN99 – 7C8772