Replacement Of The D Roller Assemblies In The Wash Rack Of Early Processors - Kodak X-Omat 270 RA Service Manual

Replacement of the D Roller Assemblies in the Wash Rack
of Early Processors
Description: WASH RACKS in current
PROCESSORS have new D ROLLER ASSEMBLIES.
Use this procedure to install these new style
D ROLLER ASSEMBLIES in early PROCESSORS.
The GEAR in the new assemblies has a HUB that
interlocks with the GEARS on B and C ROLLER
ASSEMBLIES. See the figure. This change was not
a Modification Kit.
The Part Number of the new style D ROLLER
ASSEMBLY is 246979.
• The new style D ROLLER
ASSEMBLIES have no INNER
E-RINGS.
• B and C ROLLER ASSEMBLIES, Part
No. 911660, have not changed.
2B6845
NOTE
The Original D Roller Assemblies in Early Processors
no HUB
The Difference Between the New
and the Original D Roller Assemblies
original
SHAFT
ROLLER
ASSEMBLY
911660
INNER
E-RING (2)
D
ROLLER ASSEMBLY
Part No. 246979
HUB
ROLLER
ASSEMBLY
Part No.
943441
H104_0331ACA
H104_0331AA
A
B
C
C
white
BEARING (2)
OUTER
E-RING (2)
SPRING (2)
H104_0456HCA
H104_0456HA
D
D
D
2-5