Installing the Developer Filter
[1]
Install the DEVELOPER FILTER.
[2]
Moisten the O-RING for the FILTER CAP with
water.
[3]
Install the FILTER CAP.
Adjusting the Height of the Feed Shelf
[1]
Install the DEVELOPER RACK ASSEMBLY and the DETECTOR CROSSOVER ASSEMBLY, and check
that they are positioned correctly.
DEVELOPER/FIXER
CROSSOVER ASSEMBLY
ENTRANCE
DETECTOR
ASSEMBLY
H048_0097BCA
H048_0097BA
20
Figure 17 Installing the Detector Crossover Assembly
DEVELOPER
FILTER
Figure 16 Installing the Developer Filter
FILTER
CAP
H108_0068ACA
H108_0068AA
FIXER/WASH
CROSSOVER
ASSEMBLY
SQUEEGEE
ASSEMBLY
246626