Adjusting The Intensity Of The Lamp On The 200 Circuit Board, The Control Interface - Kodak X-Omat 270 RA Service Manual

Adjusting the Intensity of the Lamp on the 200 Circuit Board, the Control Interface

[1] Rotate the POTENTIOMETER R209 to adjust
the intensity of the lamp on the 200 CIRCUIT
BOARD that is behind the CONTROL
INTERFACE PANEL.
(a) Rotate the POTENTIOMETER R209
clockwise
intensity.
(b) Rotate the POTENTIOMETER R209
counterclockwise
lamp intensity.
6-8
to increase the lamp
to decrease the
POTENTIOMETER
R209
Adjustment of the Intensity of the Lamp
on the 200 Circuit Board
CONTROL
INTERFACE
PANEL
H104_0174ACA
H104_0174AA
2B6845