Removing The Autotransformer T1 - Kodak X-Omat 270 RA Service Manual

Removing the Autotransformer T1

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Remove the FEED END ACCESS PANEL.
[3] Disconnect the CONNECTOR P/J 17.
[4] Remove the SPLASH COVER.
[5] Remove the AUTOTRANSFORMER.
[6] Reverse the above procedure to install a new
AUTOTRANSFORMER and to assemble the
PROCESSOR.
6-2
AUTOTRANSFORMER
CONNECTOR
P/J 17
Replacement of the Autotransformer
FEED END
ACCESS
PANEL
SCREW (2)
WASHER (2)
LOCK
WASHER (2)
SPLASH
COVER
H104_0171CCA
H104_0171CA
2B6845