Cleaning The Fixer Racks, Wash Racks, And Fixer Tanks - Kodak Prostar Operator's Manual

A-62051 May 2008
NOTE: Do not soak the racks longer than 30 minutes or at
temperatures above 38°C (100°F).
5. Remove the fixer racks and wash racks and rinse them thoroughly.
6. Place the fixer racks and wash racks in a container large enough to
hold them standing up and submerged; rinse them for at least 30
minutes in running water.
7. Soak the racks overnight in clean water.
8. Immerse the fixer tanks in the Kodak Fixer/Wash System Cleaner,
or equivalent.
9. Soak until the deposits have been removed.
10. Rinse the fixer tanks thoroughly with running water.
11. Close the processing section cover and let the Archive Processor
stand as is until it is time to start it up again.
33