Kodak X-Omat 270 RA Service Manual page 78

[4] Using the 2 SCREWS removed in Step (b),
install the DETECTOR SWITCH and the NUT
PLATE to the new DETECTOR SWITCH
BRACKET.
[5] Using the 2 ASSEMBLY SCREWS removed
in Step (a), install the new DETECTOR
SWITCH BRACKET to the FILM DETECTOR
HOUSING.
[6] Do Steps [3] - [5] for the non-drive side of the
FILM DETECTOR HOUSING.
H104_0372BCB
H104_0372BA
Installing the Detector Switch and Nut Plate to the New Detector Switch Bracket
6-20
FILM DETECTOR
HOUSING
[7] Install the DETECTOR CROSSOVER and the
WET SECTION COVER in the PROCESSOR.
[8] Energize the PROCESSOR.
[9] Check the operation of the DETECTOR
SWITCHES and, if necessary, adjust the
position. See page 6-21.
SCREW (2)
DETECTOR
SWITCH
BRACKET
DETECTOR SWITCH
NUT
PLATE
2B6845