Service Overview; Deenergizing And Energizing The Processor - Kodak X-Omat 270 RA Service Manual

Service Overview

Deenergizing and Energizing the Processor

For most of the service procedures, the
PROCESSOR must be deenergized. To deenergize
the PROCESSOR, move the CIRCUIT BREAKER
CB1 on the PROCESSOR to the ''O'' position and
the main wall CIRCUIT BREAKER to ''OFF''.
To energize the PROCESSOR, move the main wall
CIRCUIT BREAKER to ''ON'' and the CIRCUIT
BREAKER CB1 on the PROCESSOR to the ''|''
position.
2B6845

Deenergizing and Energizing the Processor

CIRCUIT
BREAKER
CB1
H104_0035CCE
H104_0035CA
1-5