Removing The Ac Circuit Breaker Cb1 - Kodak X-Omat 270 RA Service Manual

Removing the AC Circuit Breaker CB1

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Lift the TOP COVER.
[3] Remove the DRIVE SIDE PANEL.
[4] Remove the 2 SCREWS and the CIRCUIT
BREAKER COVER.
[5] Remove the 4 SCREWS that hold the
CIRCUIT BREAKER CB1 to the
PROCESSOR.
SCREW (2)
CIRCUIT
BREAKER
COVER
2B6845
CIRCUIT
BREAKER
CB1
Replacement of the AC Circuit Breaker CB1
[6] Record the positions of the wires at the
CIRCUIT BREAKER CB1.
[7] Disconnect the wire connections from the
CIRCUIT BREAKER CB1.
[8] Reverse the above procedure to install a new
CIRCUIT BREAKER CB1 and to assemble
the PROCESSOR.
SCREW (4)
H104_0436HCA
H104_0436HA
6-7