Installing The Racks, Crossovers, And Water Disconnect - Kodak X-Omat 270 RA Installation Instructions Manual

Installing the Racks, Crossovers, and Water Disconnect

[1] Install:
• DEVELOPER RACK
• FIXER RACK
• WASH RACK
• DRYER RACK
• DETECTOR CROSSOVER
• DEVELOPER/FIXER CROSSOVER
• FIXER/WASH CROSSOVER
• TOP EXIT RACK
• YOKE
WATER
DISCONNECT
YOKE
TOP EXIT RACK
2B6843
FITTING
Figure 8 Installing the Water Disconnect for the Wash Rack
DRYER RACK
Figure 9 Installing the Racks, Crossovers, and Yoke
[2] Connect the WATER DISCONNECT for the
WASH RACK to the FITTING.
[3] Check that all parts are seated correctly.
NOTE
An optional conversion kit is available
to convert the film exit path from the
top of the PROCESSOR to the feed
end. Order CAT No. 815-1367.
FIXER RACK
FIXER/WASH
WASH RACK
CROSSOVER
H104_0197BCB
H104_0197BA
DETECTOR
CROSSOVER
DEVELOPER RACK
DEVELOPER/FIXER
CROSSOVER
H104_0227BCE
H104_0227BA
11