Removing The Emi Line Filter Lf1 - Kodak X-Omat 270 RA Service Manual

Removing the EMI Line Filter LF1

[1] Deenergize the PROCESSOR. See page 1-5.
[2] Remove the FEED END PANEL. See page
6-3.
[3] Record the positions of the wires.
[4] Remove the wires at the EMI LINE FILTER.
[5] Remove the EMI LINE FILTER.
[6] Reverse the above procedure to install a new
EMI LINE FILTER and to assemble the
PROCESSOR.
2B6845
Replacement of the EMI Line Filter
EMI
LINE FILTER
H104_0173CCA
H104_0173CA
6-5