Adjusting The Squareness Of The Crossovers - Kodak X-Omat 270 RA Service Manual

Adjusting the Squareness of the Crossovers

Use this adjustment procedure to adjust the squareness of any of the 3 CROSSOVERS:
• DETECTOR CROSSOVER
• DEVELOPER/FIXER CROSSOVER
• FIXER/WASH CROSSOVER
[1] Remove the CROSSOVER.
[2] Place the CROSSOVER on a smooth, flat surface.
[3] Check that the SIDE PLATES of the CROSSOVER touch the flat surface evenly. If not, apply pressure
to the assembly.
[4] Check that the longer edges of the GUIDE SHOES are pointed in the direction of film travel.
SIDE
PLATE
2B6845
The GUIDE SHOES are not adjustable.
DETECTOR
CROSSOVER
FIXER/WASH CROSSOVER
GUIDE
SHOE
Checking the Crossover for Squareness
NOTE
NOTE
DEVELOPER/FIXER or
film
travel
H104_0137BCB
H104_0137BA
2-3